Mini Classifieds

Pinto brake booster needed
Date: 05/08/2021 09:00 am
ENGINE COMPLETE 1971 PINTO
Date: 12/28/2017 03:55 pm
1977 Pinto Cruizin Wagon

Date: 08/07/2023 02:52 pm
1980 Pinto for sale

Date: 11/24/2016 06:32 pm
Pinto 4-spd transmissions
Date: 06/15/2018 09:15 am
71-73 Front Kick Panels
Date: 04/25/2021 07:24 pm
2 Station Wagons for sale
Date: 04/20/2018 11:10 am
4 speed pinto transmission

Date: 05/13/2021 05:29 pm
hood for a 79-80
Date: 11/30/2018 10:55 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,892
  • Latest: Tanar_D
Stats
  • Total Posts: 139,565
  • Total Topics: 16,275
  • Online today: 537
  • Online ever: 1,681 (March 09, 2025, 10:00:10 AM)
Users Online
  • Users: 0
  • Guests: 184
  • Total: 184
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

FREE SHIPPING OF PARTS TO KNOTT'S

Started by Fred Morgan, February 09, 2010, 12:08:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blupinto

Fred you know my door and '71 inner door releases. Thank you.  ;D
One can never have too many Pintos!

Fred Morgan

For the people who purshased part's from me this is the car your looking for thanks  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

Pintopower

Ok, a few other parts I want gone.

1. I have a FREE set of 75-80 sedan seats in blue. They are in really great shape. minor tear on the drivers seat. They are the high back seats in two tone blue and slightly lighter blue. Seats are original material. These are free to someone who will use them, not sell them the minute they leave my house. You may get them friday or saturday day. Sunday evening works also. I will try to take a picture of the rear but the fronts are in the wear house.

2. Sedan doors, 77 I think. A few dents and one had minor rust that was fixed. They have been stored in doors for 10 years.

Let me know if you want these and I will get them to my house.

I also have a couple cars that I have saved and need homes.

1. 71 Pinto sedan. 80k miles, no rust, no accidents, COMPLETE minus the grille and roof rack. It is a 2.0 auto with drum front brakes. Has not run since '78. This is a california car. This is NOT a v8 project car. It is also NOT a parting out car. It is a great project that needs everything. I saved its life from someone that was going to scrap it after they took the grille and rack. This was NOT a factory roof rack car anyway. I paid $450 for it. So basically I want $450. It has been stored covered for 5 years.

http://www.flickr.com/photos/26161002@N03/sets/72157608470439457/

2.  78 Cruising Wagon. Tangerine on tangerine. Not run since '88. The engine is toast. 2.3, stick with ZERO options. Cars body is really good. Damn near no dents or dings. The car was hit in the front in the past. The battery area is DUST but I have NOS panels to fix it. This would make a great resto, turbo car or V8. It is NOT a parts car. I got this about 5 years ago to build it but made my 80 a CW instead. it has been covered ever since I have owned it. It comes with the correct steel 4 spoke wheels, NOT the BBS's in the picture. They are there because I needed something to role it at the time. It also has a good instrument cluster that comes with it. I paid $400 for it. That's what I want. If you want the wheels, which I am asked every week, they are not for sale. The last set of 16x8 BBS wheels like these on ebay went for about $600. So unless I get about that, they will remain my track wheels.

http://www.flickr.com/photos/26161002@N03/sets/72157605439449409/



I have many Pintos, I like them....
#1. 1979 Wagon V6 Restored
#2. 1977 Wagon V6 Restored
#3. 1980 Sedan I4 Original
#4. 1974 Pangra Wagon I4 Turbo
#5. 1980 Wagon I4 Restored
#6. 1976 Bobcat Squire Hatchback (Restoring)
...Like i said, I like them.
...and I have 4 Fiats.

rctinker

Holy bat butts!!!!!!!!!!!!! :hypno: :hypno:
1977 Crusin Wagon when I was 16

Fred Morgan

Robert not kidding, it would be $2432.00.  Fred   :hypno:   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

rctinker

Fred, I need Tigger's 78 CW hauled from Portland, OR to Alcester, SD.  ;D :lol: :hypno: :amazed: :surprised: ;D lol lol, just kidding.
Robert
1977 Crusin Wagon when I was 16

Pintopower

I have a ton of FREE parts that I am going to give away! I also have a solid 2.3 that i want to sell and a fully balanced 2.3 bottom end with new .020 over pistons in it that I want to sell. I just need this stuff out of here. These parts are free to those of you that want them to use. If you throw them on ebay or sell them to another user I will find you. As to what I have for free... well its just a few old battery trays, misc trip, dog dish caps, etc. I have millions of fully inventoried parts (stored indoors only, NOTHING is rotting outside) for sale also so just ask away. I may take some parts to fab fords if I know you want them  but I really don't want to sell anything that day. I am gathering stuff off of my shelves right now that I just want gone.

I am looking for 77-78 wagon instrument clusters. I will trade three 71-73 clusters for two GOOD 77-78 ones. Let me know if any one has some. I have about 15 79-80 clusters and about 6 75-76 clusters also. Not to mention about a dozen 71-3 clusters that I will NEVER use. Again, all parts have been boxed and in doors for years.

Email me at pintopower@hotmail.com

Alberto
I have many Pintos, I like them....
#1. 1979 Wagon V6 Restored
#2. 1977 Wagon V6 Restored
#3. 1980 Sedan I4 Original
#4. 1974 Pangra Wagon I4 Turbo
#5. 1980 Wagon I4 Restored
#6. 1976 Bobcat Squire Hatchback (Restoring)
...Like i said, I like them.
...and I have 4 Fiats.

Fred Morgan

Joe I did pull 1 off a 71 long time ago, I will need to look.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

Pangra74

Hey Fred,

You have any of those Pinto bumper hitches they used to sell in the 70's. I towed a few U-Hauls with my '73. I have a little utility trailer I may bring to Southern CA if I can find an original hitch. It basically has to curved arms that bolt to the rear bumper (of a 73) in the shape of a "U" and a piece of steel that curls under the rear valance and bolts to the rear floorpan.

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

Fred Morgan

HERE IS YOUR CHANCE TO GET LARGE PARTS OR ANY PART SHIPPED FOR FREE!   LET ME KNOW WHAT YOU NEED.

Contact me through this site or spot7768@netzero.net

Fred
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/


Welcome to FordPinto.com, home of the PCCA - the Pinto Car Club of America. Founded in 1999 with the goal of creating a dedicated meeting place with strong appeal to Ford Pinto and Mercury Bobcat owners and enthusiasts across all generations. Each day new members join the PCCA family expanding the knowledge base and enhancing our community.


Our site offers extensive information, technical and historic as well as live classifieds ads to find what you are looking for. One of our main goals is to save you time, money and a lot of hassle when searching for information about our cars. Not a member of our family yet? Please feel free to sign up
 for a free account and join the informative discussions in the forums when looking for that tidbit of info you seek. We, the members of FordPinto.com look forward to welcoming you to our family and hearing from you. We are here to assist in any way we can.


FordPinto.com supports the development of parts resources or parts re-manufacturing as opportunities arise. We promote the efforts of individuals and companies that endeavor to re-manufacture, sell, or otherwise distribute additional resources for the Ford Pinto or Mercury Bobcat.

As always, we at FordPinto.com encourage comments and suggestions on how we may be able to improve your experience with us. We take what our members have to say very seriously. Don't hesitate to submit your ideas and feedback.

management@fordpinto.com