Mini Classifieds

Clutch Cable Needed
Date: 04/03/2017 10:54 pm
2 liter blocks and heads
Date: 03/28/2018 09:58 am
Various Pinto stuff for sale.
Date: 11/21/2018 01:56 pm
Pinto Parts for sale
Date: 06/19/2017 02:01 pm
Rear Bumper
Date: 07/26/2021 01:08 pm
FLOOR PANS
Date: 06/12/2020 07:24 pm
Hoard of Pinto parts
Date: 12/17/2016 04:14 pm
74 Wagon Interior
Date: 01/22/2017 06:38 pm
Hoard of Pinto parts
Date: 12/17/2016 04:14 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,892
  • Latest: Tanar_D
Stats
  • Total Posts: 139,565
  • Total Topics: 16,275
  • Online today: 531
  • Online ever: 1,681 (March 09, 2025, 10:00:10 AM)
Users Online
  • Users: 0
  • Guests: 523
  • Total: 523
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

My pandemic project!

Started by Dtmix, November 14, 2020, 11:21:36 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dtmix

I went ahead and added the Seafoam (odd name if you ask me as no one would want to add saltwater to petrol!LOL)...I drove it the entire 270 beltway for a total of 57 miles. It ran well, and the more it is driven, the better it ran. I will try it for several tanks to see if it improves it by burning/ cleaning out the carbs. Fingers crossed! Thanks for all or your reassurances as it seems like snake oil, but many swears by it! 😀

Happy Motoring!
Dan
Happy Motoring!
Dan

davidpinto

around 600 miles ago i pulled the motor out of mine to freshen it up.rear main was leaking, among other things.while i had it out i slipped a new set of rod & main bearings in,all new seals and gaskets and a new set of lifters too.they were ok but had been in there for a while.got it back together and everything was great,until around 200 miles.it picked up a little lifter tic.but only happens when the motor reaches 180 deg.on hot days.at idle.when i start it up cold no problem.oil pressure 80 lbs cold.never goes under 40 lbs hot.so i pulled v-cover off every thing looked good,rolled motor over checking all the lash and found 1 lifter that would collapse a little by pushing down on the followers while on heel of cam lobes.so i replaced it with another new one.thought that was it-not- still doing exact same.it only does it on hot days above like 85 deg.in the morning and at night when its cool no tic.got me scratching my head.don't like workn on a hot motor...
D BARHAM

dga57

I'd start with adding a can of Seafoam to a tank of gasoline.  It's not going to hurt anything; I have used it in everything from Pintos to a Rolls-Royce at some point or another.

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Wittsend

My guess would be the lifter. Short of disassembling everything and still not likely being able to observe the exact cause I would try the additives. Modern oils are good at removing contaminants in the engine. Fresh oil helps. The "side effect" is that this "cleansing action" might also dislodge contaminates and cause the problem they are trying to prevent.

Was the oil change with a multi viscosity oil? If no it might be that until the oil warms up it isn't flowing as need at least in the case of the lifter that has issues.

Dtmix

The A/C job is completed!  Whew, as the 90+ degree weather was killing me!  LOL...

I have a question...I am hearing impaired, making this difficult for me to assess the issue. Please bear with me.

I was told by my family that the Pinto's 2.3 engine has a tapping sound when first started and seems to get better in ten or fifteen minutes as the car warms up. My wife and girls are not car people, but they guessed it was coming from the top part of the engine??? What does this mean?  I looked at several websites, and the one for Ford Rangers that uses 2.3 litre engine stated this is a common problem caused by carbon buildup on the hydraulic lifters that is treated with either SeaFoam or Wynns Hydraulic Valve Lifter treatment additives. Is that true?  I don't want to cause additional damage using additives that i know nothing about, so I am looking for your advisements or thoughts.

The same websites discounted that the issue is not piston-slap or other mechanical issue as the noise dissipates after warming up. Does this make sense to you or not? They also stated that it is more of a nuisance rather than an ominous sign of mechanical failure as it goes away once warmed up. They seem to be confident that the above mentioned additives to clean out the carbon buildup would do the trick.  Should I put faith in that statement?

I know that the previous elderly owner did not drive the Pinto for more than a 100 miles a year for the last ten years after her friend gave her the car as an inheritance when she passed away.  I would suspect carbon buildup would be a likely scenario.  It runs better the more I drive it.

To recap what has been done...full tune up, oil change, new timing belt, new hoses, new coolant, new valve gaskets, new oil pan gaskets, and rebuilt transmission.

Happy Motoring,
Dan

Happy Motoring!
Dan

Dtmix

They do door cards restorations, visors, and a few other things. I think they would do original seat covers as for the materials but you have to install it yourself...but not 100 percent sure. Log on their website and look up services. You can email them for a job you are seeking and they will tell you their quote if they offer that service. They do provide free samples for anything you ask for...nearly on everything. If you have a car that's rare, they will replicate it by making it for you using your submitted materials. It's not cheap, but if perfection is your goal....

As for the Pintos, they have all the materials for all model years.

Happy Motoring,
Dan
Happy Motoring!
Dan

TIGGER

Quote from: Dtmix on June 04, 2021, 07:20:00 AM
The sun-visors that I shipped to SMS Auto Fabrics in Oregon for restoration has finally been shipped back!  They were really back-logged, as I gave them the visors last October, and it's now June!  ;-)  It should arrive by next Tuesday, which I cannot wait!  The sun in my eyes is not all that pleasant, although I love the warmth it brings us!

They e-mailed me a picture of the restored visors which looked nice.  It is done using the NOS OEM Tier material in Vaquero color. I inquired about the hardware that I had sent with the visors, as it was missing from the photograph.  They said that it was already packed for shipping, and wasn't included in the snapshot.  I hope so, as I sent them everything including the mounting and the rubber end tab per directions. I will send additional pictures once it arrives and is installed. It is very easy installation...just three screws on one end and plugging in the other end piece to the dome light fixture.


Good to know.....I did not know they did restoration work.  SMS is about a 5 min drive from my work.  I went there about 9 years ago to get some headliner material for my Saleen.  Might need to go back during lunch one day to see what all services they offer now. 
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

rob289c

Your Pinto is looking great.  You are doing the right things:  repair/replace while you have already done the labor to get to it...for instance rebuild the tranny while you have it out for the seal replacement, and get the new u-joints done while the driveshaft is out.  Great job!
rob289c

dga57

They should look fantastic installed in the car!!!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Dtmix

The sun-visors that I shipped to SMS Auto Fabrics in Oregon for restoration has finally been shipped back!  They were really back-logged, as I gave them the visors last October, and it's now June!  ;-)  It should arrive by next Tuesday, which I cannot wait!  The sun in my eyes is not all that pleasant, although I love the warmth it brings us!

They e-mailed me a picture of the restored visors which looked nice.  It is done using the NOS OEM Tier material in Vaquero color. I inquired about the hardware that I had sent with the visors, as it was missing from the photograph.  They said that it was already packed for shipping, and wasn't included in the snapshot.  I hope so, as I sent them everything including the mounting and the rubber end tab per directions. I will send additional pictures once it arrives and is installed. It is very easy installation...just three screws on one end and plugging in the other end piece to the dome light fixture.

Despite the interior being in a very good condition and the headliner looks as if it is new, albeit original to the car, the sun visors looks worse for the wear.  I think it is due to having a number of clip-ons (i.e. vanity mirrors, tinted sun-screen shield, religious ornamentations) that trapped the moist humidity of Florida weather.  Surprisingly, there is no mold or odor to be found in the car, other than the visors.

Here are the before and after pictures:

Happy Motoring!
Dan

Dtmix

damaged end piece of the old valance panel...
Happy Motoring!
Dan

Dtmix

The following shows the damaged end piece of the old valance and the mounting points on the fenders and radiator support beam...
Happy Motoring!
Dan

Dtmix

more pics...
Happy Motoring!
Dan

Dtmix

Yippee!  My feared nightmare did not come true!  As you may recall several months ago that the auto-shipping company damaged my front valance panel while loading or unloading my Pinto when it was shipped here from Florida? I looked high and low for a replacement without success, even with using the OEM part number. Many dismantling yards that had Pintos did not have one as they tend to be the damaged piece or already removed from the car. So, I looked into having a reproduction fiberglass mold made from my original broken piece. I found a fabricator who was willing to do the project, as he was seeking one for himself and needed a good piece to reproduce a mold from. Most fabricators did not want to touch it, or felt it would be unprofitable for them to take it on.

Despite the lukewarm reviews on YELP, I was at end of my wits, I decided to gamble and then worried for a couple of months after shipping it off to Canada, wondering if I would ever see it again. Needless to say, I worried over nothing, as I was very pleased with his workmanship, communication, and the end product. Whew!!! He made me two complete with tabs to be drilled to line up with mounting brackets/holes. It proven to be a perfect fit!  It was not prepped for paint, per my directions, as I wanted to have it done locally.  If you are seeking a front valance panel for 1979 or 1980 Ford Pinto, he would make one for you using the mold that he created from mine. I do not know what he would charge you as he did it for me at no cost as I allowed him to use mine to create a mold as he felt there is a need for this part. I was very pleased...

His name is Rob and his business is Showcars Unlimited in Foxboro, Ontario. He has a rudimentary website where you can contact him.  He also makes spoilers, hood scoops, and other fiberglass parts. I have not personally been to his shop or seen his other parts other than what is shown online. He was pleasant during my communications with him, and was clear in what he would do or not do.

The following pictures shows an array of views.  The damaged valance panel (broken end cap and bolt holes), the bracket points on the radiator support bar in the middle, end holes in the fenders on the side, and the test-installation of the new valance panel (taken before prep and painting as flat-black like OEM).
Happy Motoring!
Dan

dga57

Wow!  Dismantling the dash is NOT for the faint of heart!  You're doing an amazing job on your Squire and once you're on the road with the Stampede, you will appreciate your efforts more than ever.  Glad you're back; missed you!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Dtmix

Closer look at heater box assembly...
Happy Motoring!
Dan

Dtmix

Dismantling dash to access the heater box and core; replaced with NOS OEM heater core with brass fittings.  Note new carpet, shift bezel, and re-dyed steering column plastic pieces.
Happy Motoring!
Dan

Dtmix

Removal of valve cover to inspect valves, inner parts, replace gaskets and repaint. Timing belt cover was removed as well for new timing belt and will be repainted.
Happy Motoring!
Dan

Dtmix

Before and after picture of the oil pan which was removed to replace gasket and to be repainted; note new steering rack.
Happy Motoring!
Dan

Dtmix

Drive shaft awaiting for new universal joint to arrive...
Happy Motoring!
Dan

Dtmix

Rack and Pinion Steering Rack, old and new;
Happy Motoring!
Dan

Dtmix

Rebuilt transmission installed...
Happy Motoring!
Dan

Dtmix

Look at the rust-free transmission tunnel and shift linkage!  It had Ziebart Rustproofing applied when new.
Happy Motoring!
Dan

Dtmix

Yeah, I can hear you saying, "...where the heck have you been?"  My apologies, as I ramped up my pandemic project, as I can see the Pinto Stampede's 50th anniversary of the Pinto show is fast approaching! 

I got a lot done in the last several weeks. I addressed the main seal leak between the transmission and engine block, and while I was at it, I decided to send the transmission for a rebuild.  I figured I would not want to deal with it later, and it had an minor issue of slipping when cold. While it was at the local transmission shop, the oil pan was dropped to clean, repaint, and replace the gasket. The flywheel was checked and looks to be in very good condition with no missing teeth and minimal wear, if any could be detected. I also was pleased to find that there was no rust in the transmission tunnel, due to the Ziebart Rustproofing being applied when new.  The steering rack was replaced with a Cardone brand remanufactured power steering rack purchased from NAPA. I also replaced the universal joints on the drive-shaft before reconnecting to the rebuilt transmission. Lastly, tackled the dreaded heater core project, whereas I replaced it with a NOS OEM heater core with brass fittings (purchased from a guy who brought out a defunct Ford Dealership). I probably could have done it without unbolting the dashboard, but I wanted to see how it all came together...what a job that was! 

The next two things to do is to have it re-aligned at a tire shop due to the new steering rack, and to repair the factory AC.  The AC wasn't a priority for me during the winter, but I should have made it a priority as it is now 87 degrees with a forecast of 91 next Tuesday!  Yikes! I ordered a new compressor and dryer from O'Reilly's Auto parts, which was described to be identical to the old.  It will be on the 134a refrigerant. It is scheduled to arrive by next Tuesday, the hottest day of the week.  Due to the Freon and my lack of knowledge with ACs, I plan to have it installed by an Auto Air Conditioner specialist here in Columbus.

Okay, fingers crossed as I upload the pictures...
Happy Motoring!
Dan

one2.34me

You're car looks great Dan! All you're hard work has definitely paid off!

dga57

Quote from: Dtmix on April 22, 2021, 11:22:09 AM
The tires were the among the most challenging part to locate due to the limited availability of 13 inch tires, and more so as white walls!


I went through that a few years ago myself, and I can't imagine it's gotten any easier! 

I DEFINITELY vote for the NOS wire wheel covers.

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Dtmix

Here's the completed woodgrain restoration and touched up rear fender-well...See earlier pics for NOS OEM wire wheel covers that I added.  These are of the original wheel covers that came with the car.  Vote which wheel covers you like better!  ;-)
Happy Motoring!
Dan

Dtmix

Blown tire damage pics (con't); note the screws for the mud flap that was torn off...
Happy Motoring!
Dan

Dtmix

Happy Motoring!
Dan

Dtmix

I am so glad that you liked the wire spokes and the WSW tires.  The tires were the among the most challenging part to locate due to the limited availability of 13 inch tires, and more so as white walls!

I looked back this forum, and realized that I couldn't upload the tire blowout and the related damages.  I will upload them now that i have "snipped" them. Note the touchup work I have had done in the above pictures  just before the wood grain restoration started. I have also included the "during portion of the wood grain project as well below...
Happy Motoring!
Dan


Welcome to FordPinto.com, home of the PCCA - the Pinto Car Club of America. Founded in 1999 with the goal of creating a dedicated meeting place with strong appeal to Ford Pinto and Mercury Bobcat owners and enthusiasts across all generations. Each day new members join the PCCA family expanding the knowledge base and enhancing our community.


Our site offers extensive information, technical and historic as well as live classifieds ads to find what you are looking for. One of our main goals is to save you time, money and a lot of hassle when searching for information about our cars. Not a member of our family yet? Please feel free to sign up
 for a free account and join the informative discussions in the forums when looking for that tidbit of info you seek. We, the members of FordPinto.com look forward to welcoming you to our family and hearing from you. We are here to assist in any way we can.


FordPinto.com supports the development of parts resources or parts re-manufacturing as opportunities arise. We promote the efforts of individuals and companies that endeavor to re-manufacture, sell, or otherwise distribute additional resources for the Ford Pinto or Mercury Bobcat.

As always, we at FordPinto.com encourage comments and suggestions on how we may be able to improve your experience with us. We take what our members have to say very seriously. Don't hesitate to submit your ideas and feedback.

management@fordpinto.com