Schoenfeld headers

[fordblue72]

My brother put that header on his 71... had to modify the mount but it worked out fine.

[rob289c]

I'm glad yours bolted right up.  On the Pacesetter header I bought, I had to heat and beat (basically flatten) the #3 tube to provide clearance between it and the right side frame rail.  I also had to remove and re-position the right side brace.  It looks cool but I wished it would have been a true bolt-on installation.  What I thought should take 15-30 minutes took the better part of an afternoon and it was in a fairly bare chassis!

[Milescabbathway]

Yes!  Bolted right up with no other mods.  2.5" all the way back sounds great too

[rob289c]

The header I bought but haven't tried out yet is: https://www.summitracing.com/parts/psm-72c1064
Not to highjack this thread but wondered if anyone has any experience with the one I bought, in addition to experience on the one that Long Time Form Man is asking about.  The one I got has a 2.5" Flanged collector.  Others I looked at were 3" open which I thought was too big for a street, stock 2.3. 

Looking forward to any feedback on all headers for 2.0 and 2.3. 

[LongTimeFordMan]

Has anyone installed the shoenfeld headers from the special run on a 2.0 in a8 stock chassis pinto?

Do they require mods to the motor mounts